 |
|
 |
 |
| |
|
| |
Below
is a general overview of the component products
that we have available. Please don’t forget,
we do not just sell components, we sell the entire
system. All pictures under this page refers to systems
that we can supply you with.
Overhead Trolleys
Inverted Trolleys
Trolley Attachments
I-Beam, Contour and Special Trolley Wheels
Push Back Rack System Wheels
Guide Rollers
Roller Turn Rollers
Food Processing Components
Conveyor Roll Bearings
Flat Top Wheels
Hand Push Trolleys
X-Type Chain
Sani-Link Chain
Pusher Dogs
Enclosed Track Chain
Power and Free Trolleys
Tow Line / Chain On Edge
Skillet Roller with Urethane Tire
Specialty and Engineered Chains Section
Frost Rotary Joints
Overhead Trolleys-
Click on image for larger picture |
Frost
Inc. produces overhead trolleys in
many different variations to meet the demands
of high temperature, high load, and highly
contaminated environments. The wheels are
available with a variety of seal options in
full ball complement or retainer type constructions.
Special lubricants are available upon request.
For more information on Frost’s
overhead Trolleys, please consult a Frost
representative. |
| |
|
Inverted Trolleys-
Click on image for larger picture |
Frost
Inc. stocks trolleys for 3”,
4” and 6” inverted systems. They
are designed to meet the demands of high temperature,
high load, and highly contaminated environments.
For more information on Frost’s
Inverted Trolleys, please consult a Frost
sales representative or the Frost
Product Catalog. |
| |
|
Trolley Attachments-
Click on image for larger picture |
Frost Inc. has trolley attachments available from stock in a variety of sizes and styles. Whether it be a B, C, H or I attachment, we can accommodate any type of attachment that you might need for your system. For a full list of what Frost has available from stock, please consult a Frost sales representative or the Frost Product Catalog. |
| |
|
I-Beam, Contour and Special Trolley Wheels-
Click on image for larger picture |
Frost Inc. has a variety of I-beam and special contoured trolley wheels to meet your conveyor needs. Frost wheels are available in full ball complement (FBC) or retainer type, or journal bearing constructions. In terms of seals, the Frost wheels are available with either an open, welsh plug only, single labyrinth shield only, triple labyrinth sealed/welsh plug, Splashproof® sealed/welsh plug, Splashproof® sealed/welsh plug/wiper seal, or contact lip seal design. For more information on Wheel Styles and Seal Designs, please consult a Frost sales representative or the Frost Product Catalog.
|
| |
|
Push Back Rack System Wheels-
Click on image for larger picture |
Frost
Inc. has your solution for push back
rack system wheels. Frost
push back wheels are designed to withstand
very high loads, are designed for easy low
friction rolling, can withstand shock received
from side loading, and can be custom designed
to fit your needs. For more information on
Frost’s Push Back Rack System
Wheels, please consult a Frost
sales representative or the Frost
Product Catalog. |
| |
|
Guide Rollers-
Click on image for larger picture |
Frost
Inc.’s guide rollers are available
in different seal and shield designs, and
are available to interchange with all OEM
designs. Their design results in a quieter
conveyor system and longer life under heavier
loads. For more information on Frost’s
Guide Roller, please consult a Frost
sales representative or the Frost
Product Catalog. |
| |
|
Roller Turn Rollers-
Click on image for larger picture |
Frost
Roller Turn Rollers are available in 3”,
4” and 6” sizes. Frost’s
low cost, standard roller has a fully contoured
inner raceway and a Nitrile contact seal,
which is purgeable so it can be used in either
sealed for life or relube applications. Rollers
are also available with internal grease retaining
rings for grease injected systems. Frost
roller turn rollers are also available for
high heat applications. For more information
on Frost’s Roller Turn
Rollers, please consult a Frost sales representative
or the Frost Product Catalog. |
| |
|
Food Processing Components-
Click on image for larger picture |
Frost Food Processing Components are the perfect choice for any food driven industry. The Sani-Trolley®, Sani-Link® chain and plated or poly wheel trolleys are specifically designed for the food handling industry. Also available is the patented Smooth Link® chain and blue poly wheel. Many of the products are available in stainless steel. For more information on Frost’s Food Processing Components, please consult a Frost sales representative or the Frost Product Catalog. |
| |
|
Conveyor Roll Bearings-
Click on image for larger picture |
Frost
Inc.’s standard bearings are
available for roll sizes ranging from 1.9”
to 4” O.D. They have been proven to
have longer life, lower noise levels, and
a greater load carrying ability. They are
fully sealed, and are engineered for today’s
high speed and low noise needs. For more information
on Frost’s conveyor
Roll Bearings, please consult a Frost
sales representative or the Frost
Product Catalog. |
| |
|
Flat Top Wheels-
Click on image for larger picture |
Frost
Inc. has specially designed flat
top wheels for your material handling needs.
They consist of double row bearings for maximum
capacity, spring loaded lip seals to keep
contamination out, full ball or retainer type
designs, sealed for life or re-lubable designs,
and are designed to withstand heavy thrust
loading in either direction. For more information
on Frost’s Flat Top
Wheels, please consult a Frost
sales representative or the Frost
Product Catalog. |
| |
|
Hand Push Trolleys-
Click on image for larger picture |
Frost
Inc. has hand push trolleys for overhead
monorail cranes and hoists. They are made
to adapt to different sized I-beams, have
an extended end flange for added safety and
a rugged body construction. An additional
feature of the hand push trolleys are bolt-on
load wheels for fast and easy wheel replacement.
For more information on Frost’s Hand
Push Trolleys, please consult a Frost sales
representative or the Frost Product Catalog. |
| |
|
X-Type Chain-
Click on image for larger picture |
Frost Inc. has X-type (I-Pin) chain for 3", 4", 6", X-100mm, and X-160mm I-beam conveyors, also available in stainless steel along with special platings and material types. Since all of the pins wear consistently you maintain consistent job spacing in your conveyor. Our Smooth Link® chain has no break-in wear or stretch period. For more information about this product please consult the Smooth Link® brochure under the download page. Also, for more information on Smooth Link® chain, please consult a Frost sales representative or the Frost Product Catalog |
| |
|
Sani-Link Chain-
Click on image for larger picture |
Frost’s
patented Sani-Link® chain is a long-wearing,
bolted style chain. The rotating pins increase
the chain life, smooth solid side links permit
easier cleaning of accumulated contaminants,
the chain is manufactured to X-348 dimensions,
and can be coated with either Zinc (silver)
Plating or Zinc & Yellow Di-Chromate (Frost
Gold) Plating. This chain also meets CEMA
and ANSI standards. For more information on
Frost’s Sani-Link®
chain, please review or request a Frost
Product Catalog. |
| |
|
Pusher Dogs-
Click on image for larger picture |
Frost
Pusher dogs are available to complement
any power and free conveyor system. They
are used to transfer power from the power
chain to the free line. Frost
has a variety of pusher dog styles and designs
readily available from stock for overhead
and inverted systems. These dogs are interchangeable
with those of most original equipment systems
companies. For more information on Frost’s
Pusher Dogs, please review or request a
Frost Product Catalog.
|
| |
|
| | | | |
 )
)
)
)
)
)
)
)
)
)
)
)
)
)