FROST Inc.

2020 Bristol, N.W. Grand Rapids Michigan 49504 USA
toll free: +1.800.783.6633


Hand Pushed Beam Trolleys          Contact Us

Frost Inc. has hand push trolleys for overhead monorail cranes and hoists. They are made to adapt to different sized I-beams, have an extended end flange for added safety and a rugged body construction. An additional feature of our hand pushed trolley are bolt-on load wheels for fast and easy wheel replacement. Notice:  All Frost Inc. Hand Pushed Trolleys are designed and manufactured to be used exclusively for assisting in the movement and transportation of inanimate objects along a horizontal “I” beam. No Frost Inc. Hand Pushed Trolley should be used for fall protection for people since the Frost Inc. Hand Pushed Trolley has not been designed, manufactured nor tested for fall protection purposes.Notice: All Frost Inc. Hand Pushed Trolleys are designed and manufactured to be used exclusively for assisting in the movement and transportation of inanimate objects along a horizontal ā€œIā€ beam. No Frost Inc. Hand Pushed Trolley should be used for fall protection for people since the Frost Inc. Hand Pushed Trolley has not been designed, manufactured nor tested for fall protection purposes.

Contact us

                                  What is the best way to contact you?

Part Number Capacity Rail Sizes
0601400 One Ton Fits 4,5,6 and 8 Inch Beams
0600400 Three Quarter Ton Fits 4,5,6 and 8 Inch Beams
0605400 Half Ton Fits 4,5,6 and 8 Inch Beams
0400400 Quarter Ton Fits 2 5/8, 3 and 4 Inch Beams

Information for 1/2, 3/4 and 1 Ton

Replacement Components

Part Number Description
0600444 Hardware Kit
0600452 Load Link
0600461 5/8-11 x 8" Bolt
0046300 5/8" Slotted Hex Nut
0600717 5/32x 1-1/2" Cotter Pin
8406600 Load Wheel W/Stud
  • Other replacement components available upon request.


  •  

Assembly Guidelines for 1/2, 3/4 and 1 Ton

Assemble 5/8” washers (060016) on bolt (0600461) to proper I-Beam Track Setting 

4 inside and 12 outside for S5 x 10.0 lb./ft. 
8 inside and 8 outside for S6 x 12.5 lb./ft. 
16 inside and 0 outside for S8 x 18.4 lb./ft.

Information for 1/4 Ton

Replacement Components

Part Number Description
0400444 Hardware Kit
0400452 Load Link
0400461 1/2-13 x 4-1/2" Bolt
0600542 1/2-13 Slotted Hex Nut
0600547 5/32" Cotter Pin
3004000 Load Wheel W/Stud
 

Assembly Guidelines for 1/4 Ton

Assemble 1/2” washers (0218898) on bolt (0400461) to proper I-Beam Track Setting

2 inside and 8 outside for S2-5/8 x 3.6 lb./ft.
4 inside and 6 outside for S3 x 5.7 lb./ft.
6 inside and 4 outside for S4 x 7.7 lb./ft.

If you don't see a part number that fits your specifications we may still carry it or could make it for you.
Please contact us for more information.