Bearings
Conveyor Roll Bearings: Part Numbers & Ratings
Frost conveyor roll bearings are fully sealed bearings for 1.9″ to 4″ O.D. rolls, built for longer life, lower noise, greater load capacity and today’s higher conveyor speeds. Choose nylon or steel retainers with nylon seals, contact seals, shields or nitrile seals. Part numbers marked * can be relubricated through the inner race.
Table key
*Re-lubrication provisions provided thru inner race.
**Based on 500 hours and 33 1/3 RPM.
| Part Number | A Tread | B Flange Diameter | C Thru-Bore | D Tread Dia. Length | E Hex Bore Size | F Hub Extension | Basic B-10 Load Rating** | Retainer | Standard Shield/Seal Configuration |
|---|---|---|---|---|---|---|---|---|---|
| 0959900 | 1.502 - 1.498 | 1.62 | .68 | .46 | 7/16" | .22 | 667 lbs. | Nylon Retainer | Single Nylon Seal Both Sides |
| 0988700 | 1.623 - 1.627 | 1.75 | .68 | .46 | 7/16" | .15 | 667 lbs. | Nylon | Single Nylon Seal Both Sides |
| 0973600 | 2.269 - 2.267 | 2.37 | .94 | .51 | 11/16" | .20 | 1,605 lbs. | Steel Retainer | Single Nylon Seal Both Sides |
| 0973200 | 2.302 - 2.298 | 2.37 | .79 | .51 | 11/16" | .20 | 1,605 lbs. | Steel Retainer | Single Nylon Seal Both Sides |
| 0983100 | 2.269 - 2.267 | 2.37 | .94 | .67 | 11/16" | .20 | 1,675 lbs. | Steel Retainer | Nylon Contact Seals Both Sides |
| 0983110* | 2.269 - 2.267 | 2.37 | .94 | .67 | 11/16" | .20 | 1,675 lbs. | Steel Retainer | Nylon Contact Seals Both Sides |
| 0983200 | 2.269 - 2.267 | 2.37 | .94 | .67 | 11/16" | .20 | 1,675 lbs. | Steel Retainer | Shield Only Both Sides |
| 0985200 | 2.269 - 2.267 | 2.37 | 1.20 | .67 | 11/16" | .48 | 1,675 lbs. | Steel Retainer | Shielded Both Sides |
| 2126360* | 3.074 - 3.073 | No Flange | 1.47 | 1.09 | 1-1/16" | .38 | 2,978 lbs. | Steel Retainer | Sealed Both Sides |
| 2126390 | 3.796 - 3.792 | 3.93 | 1.47 | .91 | 1-1/16" | .56 | 2,978 lbs. | Steel Retainer | Sealed Both Sides |
| 2126530 | 2.4415 - 2.4395 | 2.656 | .766 | .566 | 1-1/16" | .20 | 2,168 lbs. | Nylon | Buna-N (Nitrile Rubber) Both Sides |