Chain Roller Turn Rollers
High Temperature
Style 3 High Temperature roller turn rollers use a journal type bearing instead of balls, built for ovens and other high heat applications. Heat capacity is up to 800°F (427°C) in continuous operation, with 2.75″ and 2.95″ ODs and a 2,200 lb load rating. Load ratings are based on 5,000 hours B-10 life at 33 1/3 RPM.
Need a match? Send the OD, Bore Diameter and Overall Length, or the part number and a photo, and our team will find it.
How to measure your roller.
Three caliper readings, each to 0.01 in. The letters match the table below.
- AOverall LengthEnd to end, across the inner race at both ends.
- BOuter DiameterAcross the outer race. A worn race can read small.
- CBore DiameterInside jaws in the bore the bolt passes through.
Standard roller shown. Every type is measured the same way. Find your part number in the measuring guide ›
| Part Number | Outer Diameter (B) | Bore Diameter (C) | Outer Race Length | Overall Length (A) | Extension | Extension Diameter | Load Rating Lbs | Bearing Style |
|---|---|---|---|---|---|---|---|---|
| 0412000 | 2.75 (69.9) | .58 (14.7) | 1.88 (47.8) | 2.13 (54.1) | .25 (6.4) | 1.00 (25.4) | 2,200 | High-Temp. Journal |
| 0412500 | 2.75 (69.9) | .50 (12.7) | 1.88 (47.8) | 2.13 (54.1) | .13 (3.3) | 1.00 (25.4) | 2,200 | High-Temp. Journal |
| 0413000 | 2.75 (69.9) | .58 (14.7) | 2.50 (63.5) | 2.75 (69.9) | .13 (3.3) | 1.00 (25.4) | 2,200 | High-Temp. Journal |
| 0413500 | 2.75 (69.9) | .50 (12.7) | 2.50 (63.5) | 2.75 (69.9) | .13 (3.3) | 1.00 (25.4) | 2,200 | High-Temp. Journal |
| 0413520 | 2.75 (69.9) | .63 (16.0) | 2.50 (63.5) | 2.75 (69.9) | .13 (3.3) | 1.00 (25.4) | 2,200 | High-Temp. Journal |