Conveyor Chain Monitoring Tools

Frost offers two tools that measure your installed conveyor chain: a chain wear monitor that tracks how much the chain has worn, and LoadLink, which measures the load it pulls. Together they show when a chain needs attention, so the change-out lands on a planned shutdown instead of a breakdown.

Two tools, side by side.

Chain Wear Monitor LoadLink
Tells you How much your chain has worn, tracked over time How much load your chain is pulling, in lb
Installs Portable unit, or a permanent mount on the line In the chain, with master pins
Chains Enclosed track, CC5 or roller, X-348, X-458 and X-678 X-348, X-458 and X-678
Data Summary report and link set readings; software provided Time stamped logs sent by RF; software provided
Also Bent trolley detection and a high wear marking system Rechargeable with USB-C

Plus: our team, on site

A Health Assessment is a service, not a device. Someone from Frost walks your conveyors and inspects the drive, take-up, chain, turns, track, and trolleys, then sends you an Executive Summary. See chain assessment services.

Not sure where to start?

Is my chain stretching? Start with the Chain Wear Monitor.
How much load is my chain pulling? Start with LoadLink.
What shape is the whole line in? Have our team do a Health Assessment.
Still not sure? Email our team or call 616.453.7781.

Talk with our team

Tell us about your line.

Send your conveyor type, chain size and what you are seeing on the line. We will tell you where to start.

Email our team

616.453.7781 · frost.sales@frostinc.com

Product Specifications

Questions? Call usRequest a Quote
Frost Inc. | 2020 Bristol Ave NW, Grand Rapids, MI 49504 | 616.453.7781 | frost.sales@frostinc.com