Conveyor Chain Monitoring Tools
LoadLink
LoadLink measures and records the dynamic load on your conveyor chain, in pounds, as the line runs. It installs in X-type chain with master pins and works on overhead and inverted conveyors running X-348, X-458 or X-678 chain.
X-348, X-458 and X-678Dynamic load in lbTime stamped logsUSB-C rechargeable
Questions? Call 616.453.7781
Product, software and data.
01 Product
It rides in your chain.

- Installs in X-348, X-458 or X-678 chain with two master pins.
- Measures dynamic load in lb as the line runs and keeps time stamped logs.
- Works on overhead and inverted X-type conveyors.
- Recharges with standard USB-C.
02 Software
Your data comes back by RF.

LoadLink sends its time stamped logs by radio frequency to the software we provide.
- Take samples and set up the link.
- Download logged sessions.
- We train your team remote or on site.
03 Data
Find the high load spots.
The load profile plots chain load, in lb, around the full circuit. Each numbered spike lines up with a point on your conveyor layout, so you know where load jumps and which components to check first.
Sample load profile, read left to right over one trip around the conveyor. Numbers mark locations on the customer’s conveyor layout. Click the chart to open it full size.
Specifications.
| Chain sizes | X-348, X-458 and X-678 |
|---|---|
| Conveyors | Overhead and inverted X-type |
| Measures | Dynamic load, in lb |
| Data | Time stamped logs, sent by RF |
| Install | Master pins |
| Max operating temp | 136.4°F |
| Charging | Rechargeable, standard USB-C |
| Software and training | Software provided; training remote or on site |
From the Frost Reliability Tools brochure.
Questions we hear a lot.
What does LoadLink measure?
Dynamic load, in pounds, on overhead and inverted X-type conveyors running X-348, X-458 or X-678 chain.
How do I get the data?
LoadLink keeps time stamped logs and sends them by RF to the software we provide. We train your team on it, remote or on site.
Can it run in a hot area?
Its maximum operating temperature is 136.4°F. Tell us where on the line you want to measure and we will help you plan the run.
How is this different from the chain wear monitor?
LoadLink tells you how much load your chain is pulling. The chain wear monitor tells you how much your chain has worn.
Talk with our team
Tell us what you want to measure.
Send your chain size, whether the conveyor is overhead or inverted, and what you want to learn about the load.
616.453.7781 · frost.sales@frostinc.com
Also see: Chain Wear Monitor · Chain assessment services · How to measure conveyor chain · Reliability Tools brochure (PDF)
